JVC KD-G807: BASIC OPERATIONS

BASIC OPERATIONS

ENGLISH

1

3

2

Volume level appears.

Turning on the power

1

Turn on the power.

Volume level indicator

4

Adjust the sound as you want.

Note on One-Touch Operation:

(See pages 31 – 33.)

When you select a source in step

2

below, the

power automatically comes on. You do not have

to press this button to turn on the power.

To drop the volume in a moment

2

Select the source.

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

• If you turn the control dial, you can also restore

To operate the tuner (FM or AM),

the sound.

see pages 10 – 20.

To play a CD,

To turn off the power

see pages 21 – 24.

Press and hold for more than one

To play an MP3/WMA disc,

second.

see pages 26 – 30.

“SEE YOU” appears, then the unit turns off.

To operate the CD changer,

• If you turn off the power while listening to a

see pages 42 – 46.

disc, disc play will start from where playback

To operate the external component

has been stopped previously, next time you

(LINE IN), see page 47.

turn on the power.

To operate the DAB tuner,

see pages 48 – 51.

CAUTION on Volume Setting:

3

Adjust the volume.

Discs produce very little noise compared with

other sources. If the volume level is adjusted for

To increase the volume

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

level. Therefore, lower the volume before playing a

To decrease the volume

disc and adjust it as required during playback.

7

EN07-09_KD-G807[EE]f.p65 1/15/04, 2:08 PM7

ENGLISH

Canceling the display

3

Select “DEMO OFF.”

demonstration

When shipped from the factory, display

demonstration has been activated, and starts

DEMO OFF

DEMO ON

automatically when no operations are done for

about 20 seconds.

• It is recommended to cancel the display

demonstration before you use the unit for the

first time.

To cancel the display demonstration, follow

the procedure below:

4

Finish the setting.

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 34 and 35.)

To activate the display demonstration, repeat

the same procedure and select “DEMO ON” in

step

3

.

2

Select “DEMO MODE” if not shown

on the display.

8

EN07-09_KD-G807[EE]f.p65 1/15/04, 2:08 PM8

ENGLISH

Setting the clock

4

Set the clock system.

1 Select “CLOCK24H/12H.”

You can also set the clock system to either

2 Select “CLOCK 24HOUR” or “CLOCK

24 hours or 12 hours.

12HOUR.”

12

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM items appears on the display.

(PSM: see pages 34 and 35.)

5

Finish the setting.

2

Set the hour.

1 Select “CLOCK HOUR” if not shown on

the display.

2 Adjust the hour.

12

Note:

To show the clock time on the display, see page 36.

To check other information during play, press

DISP (display).

3

Set the minute.

1 Select “CLOCK MINUTE.”

2 Adjust the minute.

12

Each time you press the button, the other

information will be shown on the lower part of the

display. (See page 36 for details.)

• Pressing DISP (display) with the unit turned off

will show the clock time for about 5 seconds.

9

EN07-09_KD-G807[EE]f.p65 1/15/04, 2:08 PM9