Dell Latitude XT2: Display Assembly
Display Assembly : Dell Latitude XT2
Display Assembly
Dell™Latitude™XT2ServiceManual
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Tablet-PC.
2. Remove the battery from the Tablet-PC.
3. Remove the memory and mini-card cover from the Tablet-PC.
4. Remove the hinge cover from the Tablet-PC.
5. Remove the grip cover from the Tablet-PC.
6. Disconnect any antenna cables from the bottom of the Tablet-PC.
WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
7. From the top of the closed Tablet-PC, remove the two screws from the display assembly hinge grip.
8. From the inside of the Tablet-PC, disconnect the display assembly cable from the system board.
9. Unthread the antenna cables from the inside of the Tablet-PC.
10. Remove the five screws securing the display assembly to the Tablet-PC.
11. Lift the display assembly straight up to separate it from the Tablet-PC.
12. Remove the display assembly.
Оглавление
- Dell™Latitude™XT2ServiceManual
- System BIOS
- Diagnostics
- Digitizer Options Tab
- Tablet-PC Features
- Interaction Options Tab
- Application Matrix
- Multi-Touch Gestures Feature
- About Tab
- Adding and Replacing Parts
- Tablet-PC Pen
- Specifications
- Tablet-PC Buttons
- Tablet-PC Interface
- Table-PC User Modes
- Tablet-PC Settings
- Memory and Mini-Card Cover
- Main Battery
- Battery Latch
- BIOS Chip
- Internal Card With Bluetooth®Wireless Technology
- Coin-Cell Battery
- Grip Cover
- Hard Drive
- Heat Sink and Fan Assembly
- Keyboard
- Display Assembly
- Hinge Cover
- Memory
- Palm Rest
- Speaker
- System Board
- Mini-Card
- Tablet-PC Modes
- Working on Your Tablet-PC
